Yamaha F150 Servisní příručka stáhnout pdf (Strana 240)

BRKT

Bracket unit

7-31

63P3F11

3. Remove the lead holder

1

and rubber

spacers

2

from the stator, and then slide

them away from the stator.

4. Remove the stator

3

.

NOTE:

Place a clean cloth over the end of the arma-

ture shaft, hold it with a pair of pliers, and

then carefully slide the stator off of the arma-

ture.

5. Remove the armature from the PTT

motor base.

CAUTION:

Do not allow grease or oil to contact the

commutator.

6. Disconnect the PTT motor lead (sky

blue)

4

.

NOTE:

Hold the brush with a screwdriver as shown,

and then disconnect the PTT motor lead (sky

blue).

7. Remove the screw, disconnect the PTT

motor lead (light green)

5

, and then

remove the brushes

6

.

CAUTION:

• Do not pull the PTT motor leads out

from the stator.

• Do not touch the bimetal

a

, otherwise

the operation of the circuit breaker can

be affected.

Checking the power trim and tilt

motor

1. Measure the length of the brushes.

Replace if out of specification.

S60X7240

4

Brush length limit

a

:

4.8 mm (0.19 in)

1 2 ... 235 236 237 238 239 240 241 242 243 244 245 ... 312 313

Komentáře k této Příručce

Žádné komentáře