Yamaha DIO8 Uživatelský manuál stáhnout pdf

V516420 R2 1 IP 20

100 CR Printed in Japan

Owner’s Manual

DIGITAL IO BOX

1 2 3 4 5 6 7 8 9

V516420 R2 1 IP 20100 CR Printed in JapanOwner’s ManualDIGITAL IO BOXE

2 Trademarks • ADAT is registered trademark of Alesis Corporation.• TEAC is registered trademark of TEAC Corporation.FCC INFORMATION (U.S.A.)1. IMPOR

3 Precautions •Do not place a container with liquid or small metal objects on top of this unit. Liquid or metal objects inside this unit are a ﬁre

4 Front panel Rear panel Thank you for choosing the DIO8 digital IO box, speciﬁcally designed for the Yamaha PM1D digital audio mixing syst

5 A I/O UNIT ID indicator This indicates the connector number (the number of the connector used to control the DIO8) of the engine DSP unit (DSP1D/DS

6 ● Using slots 1-4 input signals with two DSP1D/DSP1D-EXs simultaneously 1) Connect the INPUT A connector of the DIO8 to OUT-PUT slot 1-6 of the ﬁrs

7 Installing an optional I/O card 1. Turn off the power to the DIO8 and remove the power cord from the DIO8.2. Loosen two screws as shown below and r

8 I/OsSlots Eight slots (slots 1-8) are available on the DIO8 for installing digital I/O cards and analog I/O cards. Slot 1 supports a serial interfa

YAMAHA CORPORATIONPro Audio & Digital Musical Instrument DivisionP.O. Box 3, Hamamatsu, 430-8651, Japan

Další dokumenty pro Audio Yamaha DIO8

Žádné komentáře