Yamaha AI8 Specifikace stáhnout pdf (Strana 4)

PM1D System Software Update Guide

2. Updating the CS1D screen software

To update the CS1D screen software, you will use one memory

card, and copy the downloaded file via the memory card into the

CS1D. Before you perform this procedure, you must complete

the firmware update described in the preceding section.

2-1

You will need to provide a commercially-available

memory card and a system that is able to read this

card (e.g., a notebook computer that has a

PCMCIA Type II slot).

Turn off the power of the CS1D.

2-2

Insert the FAT16-formatted memory card into

your computer.

For details on how to format the card, refer to the manual

of your computer or card.

2-3

Open the CS1DAPP folder in the pm1d_system***

folder (“***” stands for a version number) that

you have already downloaded and expanded,

then choose [Select all] from the [Edit] menu.

Then choose [Copy] from the [Edit] menu.

2-4

From “My Computer,” open the drive of the

memory card you inserted.

2-5

From the [Edit] menu, choose [Paste].

2-6

When the copy operation has been completed,

remove the memory card.

For details on removing the card, refer to the manual of

your computer or memory card.

2-7

Insert the memory card into the CS1D’s PC ATA

STORAGE CARD slot A or B, and turn on the

power of the CS1D.

The normal start-up title screen will not appear, and the

CS1D will be in update mode.

2-8

When “START?” appears in the screen, use the

track pad to click the OK button.

If you click the CANCEL button at this time, the CS1D will

stop operating. Remove the card, and restart the CS1D.

2-9

When the screen indicates “COPY OK,” remove

the card and restart the CS1D and all other

components.

Make sure that the CS1D does not display a version check

popup message (see page 5) on the LCD.

3. Initializing the memory

Be sure to initialize the memory after you update the firmware

and CS1D screen software.

3-1

Turn off the power of the PW1D power supply.

3-2

Turn on the power to the PW1D.

After the opening screen appears on the

CS1D’s LCD, press and hold down the left

and right switches located below the track

pad in the data entry block until the CS1D

displays the following screen.

3-3

Use the track pad and the left/right switches to

select “INITIALIZE ALL MEMORIES.”

The corresponding display shown below will appear.

“INITIALIZE ALL MEMORIES”: All memory will be

initialized. All parameters that can be stored in memory

will return to their factory-set condition.

3-4

Use the left/right switches on the track pad to

select OK.

After initialization occurs, the system will restart.

The update operation is now complete.

NOTE:

If the operation fails, the CS1D displays a popup message

indicating that the version check operation failed. In this case, make

sure that all settings and connections are correct, then restart the

firmware update.

•

Insert only one memory card in the PC ATA STORAGE

CARD slot. If you simultaneously insert another card

into the other vacant slot, the update may not occur

correctly.

•

If you updated the entire system, you must execute

INITIALIZE ALL MEMORIES. Operation cannot be

guaranteed if you fail to initialize the memories.

1 2 3 4 5 6 7 8

Komentáře k této Příručce

Žádné komentáře

Yamaha AI8 Specifikace Strana 4

Komentáře k této Příručce

Související produkty a manuály pro ne Yamaha AI8