PM1D System Software Update Guide
2
• 10 MB or more free hard disk space
• Mouse
• Serial port
• RS-232C cable (cross-connected)
• One ATA-compliant PCMCIA Type II PC Flash Storage card
(subsequently referred to as “memory card”)
•A device with a PCMCIA Type II card slot (A system that
enables you to copy downloaded files to the memory card)
When updating the system, you must perform the update and
installation for all components. Using the procedure described
below, perform the firmware update and the CS1D screen
software update.
Before you start the procedure below, download the update file
named “pm1d_system***.zip (“***” stands for a version
number)” from the Yamaha website and expand the file.
http://www.yamahaproaudio.com/downloads/index.html
1. Updating the firmware (CS1D/
DSP1D(-EX)/AI8/AO8/DIO8)
You will use the PM1DLOAD software to update the firmware of
each component. The basic procedure and the update method
for each firmware is explained below.
[Explanation of each screen in PM1DLOAD]
Mode Select screen
A
“Write via serial port” mode
You must select this.
B
“Write board directly” mode
Do not select this.
Main screen
C
[Setup] menu
D
Target select menu
...................specify the component to be
written
E
Overall version
.........................indicates the version to be
written (overall version)
F
Writing target check boxes
......check boxes select writing
target
G
ROM version field
....................indicates the currently-
written version
H
File version field
.......................indicates the version to be
written
I
[GetVer.] button
.......................obtains the ROM version
J
[Write] button
..........................initiates firmware writing for
all items checked in the
writing check boxes
6
K
[ALL] button
.............................check all writing check boxes
6
L
[CLEAR] button
........................uncheck all writing check
boxes
6
System update procedure
Scene data etc. that you created using this system must be
backed up on a memory card before you perform the update.
The internal data will be lost when you perform the update
procedure.
For details on how to save data to a memory card, refer to
the Reference Manual (Software).
Do NOT turn off the power to the system or connect or
disconnect the cables during the update operation. Otherwise,
the software licensing information may be deleted if you are
updating the PM1D Version 2 system software. If the update
operation is interrupted, turn off the power to each
component, wait at least five seconds, turn on the power to
the components, then restart the update operation.
2
1
Serial Port
select the computer’s serial port to use
Connection Point
select the serial port to use on the PM1D
system
Fonts
change the display font
4
6
5
9
J
(6 stránky)
(336 stránky)
(28 stránky)
(34 stránky)
(48 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce