Yamaha QL5 Manuál Strana 183
- Strana / 294
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Setup
Reference Manual
183
BUS SETUP field
This field enables you to make bus-related settings.
D BUS SETUP button
Press this button to open the BUS SETUP window, in which you can make MIX bus/
MATRIX bus-related settings.
E SURROUND SETUP button
Press this button to call up the SURROUND SETUP screen. In this screen, you can switch
the bus settings from Stereo mode to Surround mode. If set to Stereo mode, the bus
settings for MIX1-6 will be grayed out. If you press the 5.1 SURROUND button to switch
to Surround mode, you can then set the bus settings for MIX1-6.
Assign channels to MIX 1 - 6 for surround output. You can press the APPLY button to
open the CONFIRMATION dialog box. Press the OK button to set the bus to Surround
mode.
NOTE
• When you switch from Stereo mode to Surround mode, the signals for MIX1/2, 3/4, and 5/6
change to MONO x2.
• When you switch from Surround mode to Stereo mode, the signals for MIX1/2, 3/4, and 5/6
remain as MONO x2.
• When you switch from Stereo mode to Surround mode, the STEREO and MONO(C) inserts are
turned off.
For Stereo mode
For Surround mode
- Reference Manual 1
- Contents 2
- Function Tree 4
- SELECTED CHANNEL section 10
- Reference Manual 10
- Channel Strip section 11
- TO STEREO/MONO field 13
- 1 TO STEREO PAN knob 13
- 2 ST/MONO indicator 13
- DCA group field 13
- Mute group field 13
- Input and output patching 14
- PATCH/NAME screen 15
- 4 Category select list 16
- 5 Port select buttons 16
- 7 Close button 16
- CH SELECT screen 18
- INSERT screen (8ch) 19
- DIRECT OUT screen (8ch) 22
- Input channels 23
- 2 Icon select buttons 25
- 3 Sample name setup buttons 25
- When selecting the NAME tab 25
- Making HA (Head Amp) settings 26
- GAIN/PATCH window (8ch) 27
- GAIN/PATCH window 29
- STEREO/MONO bus 30
- TO STEREO/MONO window (8ch) 31
- TO STEREO/MONO window 32
- MATRIX bus 34
- MIX SEND/MATRIX SEND window 35
- SENDS ON FADER mode 36
- INPUT DELAY window (8ch) 37
- LR-MONO 39
- Setting procedure 39
- 1 LR-MONO SELECT field 39
- 2 LR-MONO SELECT button 39
- Setting Surround mode 40
- SELECTED CHANNEL VIEW screen 40
- OVERVIEW screen 41
- SURROUND PAN 1CH screen 42
- 1 Surround graph 43
- 2 L/R F/R switch button 43
- Channel library operations 44
- OUTPUT channels 45
- MONO bus 47
- MONO channels to MATRIX buses 49
- 6 PRE/POST button 50
- 7 SEND ON/OFF button 50
- 8 SEND PAN/BALANCE knob 50
- 9 SEND LEVEL knob 50
- OUTPUT PORT screen 51
- 6 DELAY button 52
- 7 Ø (Phase) button 52
- 8 GAIN knob 52
- 9 Level meter 52
- EQ and Dynamics 54
- HPF/EQ window (8ch) 56
- Using dynamics 57
- DYNAMICS1/2 window (8ch) 59
- ST IN (QL1), OUTPUT) 59
- EQ library 60
- Dynamics library 60
- Channel Job 61
- Mute group 63
- 1 CLEAR ALL button 64
- 3 Mute group assign field 64
- 4 NAME EDIT button 64
- Using mute groups 65
- Using the Mute Safe function 66
- RECALL SAFE MODE window 67
- 5 Channel select button 68
- 6 Selected channel display 68
- Channel Link function 69
- 1 Input channel display field 70
- 2 Link indicator 70
- 3 LINK PARAMETER field 71
- 4 SEND PARAMETER field 71
- 5 INPUT/OUTPUT button 71
- Channel link operations 71
- CH LINK SET window 73
- CH COPY MODE window 74
- 1 SOURCE CH field 75
- 2 DESTINATION CHs field 75
- 3 COPY button 75
- 4 CLOSE button 75
- CH MOVE MODE window 76
- About Mix Minus 77
- Scene memory 79
- Storing and recalling scenes 80
- SCENE LIST window 81
- Recalling a scene 82
- Editing scene memories 84
- Scene memory editing 85
- Copying and pasting a scene 85
- Clearing a scene 85
- Cutting a scene 86
- Inserting a scene 86
- GLOBAL PASTE window 87
- FOCUS RECALL window 89
- Using the Fade function 90
- FADE TIME window 91
- 1 GPI OUT CONTROL buttons 92
- 2 CURRENT SETTING field 92
- 1 PLAY button 93
- 2 Song select button 93
- 3 Offset time display 93
- 4 CURRENT SETTING field 93
- Using Preview mode 94
- Using the Monitor function 97
- MONITOR window 99
- 8 MONITOR FADER field 100
- 9 MONITOR DELAY field 100
- 0 Meter field 100
- A ASSIGN field 100
- Monitor and Cue functions 101
- MONITOR SOURCE SETUP screen 102
- Using the Cue function 103
- Operating the Cue function 104
- MONITOR screen 105
- CUE window 106
- CUE screen (Surround mode) 107
- Talkback and Oscillator 108
- TALKBACK window 109
- Using the Oscillator function 110
- OSCILLATOR window 111
- 3 ASSIGN section 112
- 4 Meter section 112
- 5 OSCILLATOR OUTPUT button 112
- INPUT/OUTPUT/RTA tab 113
- INPUT METER screen 113
- OUTPUT METER screen 113
- Fader level and meter display 114
- METERING POINT field 114
- PEAK HOLD button 114
- SHOW SEND LEVEL button 114
- RTA METER screen 115
- METER screen (Surround mode) 116
- Function Access Area screen 117
- Premium Rack 118
- Virtual rack operations 119
- 4 INPUT PATCH button 120
- 5 OUTPUT PATCH button 120
- 6 Rack container 120
- Graphic EQ operations 122
- Inserting a GEQ in a channel 123
- GEQ EDIT window 123
- 4 RACK LINK button 124
- 5 FLAT button 124
- 6 GEQ ON/OFF button 124
- 1 RTA button 124
- 2 HOLD button 124
- Using the 31BandGEQ 125
- GEQ EDIT window (31BandGEQ) 125
- Using the Flex15GEQ 126
- GEQ EDIT window (Flex 15GEQ) 126
- Parametric EQ operations 126
- PEQ EDIT window 127
- PEQ EDIT window (8PEQ) 128
- About AUTOMIXER 129
- Using Automixer 130
- Editing the internal effects 132
- 1 Effect title/type 134
- 2 Input/output meters 134
- EFFECT EDIT window 135
- Using the Tap Tempo function 136
- Using the Premium Rack 139
- Linked in reverse 146
- Premium Rack libraries 148
- Using an I/O device 149
- DANTE INPUT PATCH window 150
- PORT SELECT window 150
- OUTPUT PATCH window 151
- I/O DEVICE screen (I/O page) 152
- Remotely controlling an amp 154
- I/O DEVICE screen (AMP page) 155
- 3 DANTE SETUP button 156
- Daisy chain network 157
- Ring connection 157
- 1 EXTERNAL HA field 158
- 2 ID/Model name/+48V master 158
- 3 Virtual racks 158
- EXTERNAL HA window 159
- INTERNAL HA window 160
- Basic MIDI settings 161
- 1 TERMINAL field 163
- 2 PORT NO. field 163
- 3 OK button 163
- 1 CH field 163
- 2 OK button 163
- 1 PROGRAM CHANGE field 164
- 2 PROGRAM CHANGE MODE field 164
- MIDI PROGRAM CHANGE window 165
- MIDI CONTROL CHANGE window 168
- Recorder 169
- CH SELECT window 170
- 3 4A0987 5 6 171
- RECORDER screen 173
- Editing the title list 174
- Required devices and software 175
- Word clock settings 176
- Dante Accelerator settings 176
- Setting up Dante Controller 177
- Setting up DAW software 177
- Audio recording and playback 177
- Preparing the project 178
- Recording into a project 178
- NUENDO LIVE SETUP window 179
- Playing a multi-track project 181
- About the SETUP screen 182
- BUS SETUP field 183
- D BUS SETUP button 183
- E SURROUND SETUP button 183
- User settings 185
- CREATE USER KEY window 187
- Logging-in 187
- Logging-in as Guest 188
- Logging-in as a User 188
- Changing the password 189
- Changing the user level 190
- USER SETUP window 190
- Preferences 192
- USER DEFINED keys 194
- USER DEFINED knobs 199
- Custom fader bank 202
- Locking the console 204
- Unlocking the console 204
- SAVE/LOAD window 205
- SAVE SELECT screen 206
- LOAD SELECT screen 208
- 1 2 3 4 5 209
- Formatting a USB flash drive 210
- Word clock and slot settings 211
- WORD CLOCK/SLOT window 212
- Using cascade connections 213
- QL BQL A 213
- 2 CASCADE LINK MODE buttons 214
- BUS SETUP window 216
- 1 2 3 4 5 6 7 217
- Setting the network address 218
- NETWORK window 219
- Daisy chain connections 223
- Redundant connections 223
- DANTE SETUP window 224
- 1 DEVICE LABEL 226
- 2 INPUT/OUTPUT knobs 226
- 3 Device label entry keyboard 226
- REMOTE HA settings 227
- REMOTE HA SELECT window 227
- Displaying the device status 228
- Messages 228
- Error messages 229
- Warning messages 229
- Using GPI IN 230
- MIDI/GPI screen (GPI page) 231
- Using GPI OUT 231
- Using FADER START 233
- 5 MODE field 234
- Help function 235
- Other functions 237
- ∞ dB (all the way down) 238
- EXIT button 241
- Warning/Error Messages 242
- Data List 246
- EQ Library List 247
- DYNAMICS Library List 248
- Data List 249
- * At fs=44.1 kHz 249
- Dynamics Parameters 250
- COMPRESSOR 251
- EXPANDER 251
- Effect Type List 252
- Effects Parameters 253
- STEREO REVERB 254
- EARLY REF 254
- GATE REVERB, REVERSE GATE 254
- MONO DELAY 254
- STEREO DELAY 254
- MOD. DELAY 255
- DELAY LCR 255
- CHORUS 255
- FLANGE 256
- SYMPHONIC 256
- PHASER 256
- DYNA.FLANGE 256
- DYNA.PHASER 257
- HQ.PITCH 257
- DUAL PITCH 257
- TREMOLO 257
- AUTOPAN 258
- ROTARY 258
- RING MOD 258
- MOD.FILTER 258
- DYNA.FILTER 258
- REV+CHORUS 259
- REVCHORUS 259
- REV+FLANGE 259
- REVFLANGE 259
- REV+SYMPHO 260
- REVSYMPHO 260
- REVPAN 260
- DELAY+ER 260
- DELAYER 261
- DELAY+REV 261
- DELAYREV 261
- DISTDELAY 262
- MULTI FILTER 262
- FREEZE 262
- DISTORTION 262
- AMP SIMULATE 263
- COMP276 263
- COMP276S 263
- COMP260 263
- COMP260S 263
- EQUALIZER601 264
- OPENDECK 264
- M.BAND DYNA 264
- M.BAND COMP 265
- Portico5033 265
- Portico5043 265
- Opt-2A 266
- Dynamic EQ 266
- Buss Comp 369 266
- Automixer Parameters 267
- NRPN parameter assignments 271
- Input channels 275
- MIX Channels 277
- MATRIX Channels 278
- STEREO, MONO Channels 279
- MIDI Data Format 281
- 2 SYSTEM REALTIME MESSAGE 282
- 3 SYSTEM EXCLUSIVE MESSAGE 282
- 4 PARAMETER CHANGE details 283
- 4.5 EXIST LIBRARY RANGE 285
- 4.7 FUNCTION CALL – MODULE – 286
- 4.9 LEVEL METER DATA 287
- Input/Output Specifications 288
- Electrical characteristics 289
- Dynamic Range. Fs= 48 kHz 290
- Sampling Frequency 290
- Mixer Basic Parameters 291
- MIDI Implementation Chart 293
Související produkty a manuály pro Software Yamaha QL5
Software Yamaha CL5 Manuál
(302 stránky)
(302 stránky)
Software Yamaha MOXF8 Uživatelský manuál
(57 stránky)
(57 stránky)
Software Yamaha Amp Editor Uživatelský manuál
(211 stránky)
(211 stránky)
Software Yamaha CL5/CL3/CL1 V1.5 Uživatelský manuál
(277 stránky)
(277 stránky)
Software Yamaha V4.0 Uživatelský manuál
(526 stránky)
(526 stránky)
Software Yamaha V3 Uživatelský manuál
(83 stránky)
(83 stránky)
Software Yamaha MOX6 Manuál
(160 stránky)
(160 stránky)
Software Yamaha XF6 Manuál
(255 stránky)
(255 stránky)
Software Yamaha MOXF8 Manuál
(163 stránky)
(163 stránky)
Software Yamaha MOX6 Uživatelský manuál
(57 stránky)
(57 stránky)
Software Yamaha PSR-S975 Manuál
(136 stránky)
(136 stránky)
Software Yamaha Tyros3 Manuál
(130 stránky)
(130 stránky)
Software Yamaha FP7210A Uživatelský manuál
(2 stránky)
(2 stránky)
Software Yamaha HS650A Uživatelský manuál
(2 stránky)
(2 stránky)
Software Yamaha HS850 Uživatelský manuál
(1 stránky)
(1 stránky)
Software Yamaha Expansion Manager Uživatelský manuál
(25 stránky)
(25 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.167 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce