Yamaha QL5 Manuál

Procházejte online nebo si stáhněte Manuál pro Software Yamaha QL5. Yamaha QL5 User manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 294
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
EN
How to Use This Reference Manual
The QL5/QL1 Reference Manual (this document) allows you to
search for terms and take advantage of links in the text.
Searching for terms
To search for a term, use the search function of the software
you're using to view this document.
If you're using Adobe Reader, enter the term in the search box
and press the <Enter> key of your computer keyboard to search
for occurrences of that term.
Displaying the next/previous view
If you're using Adobe Reader, you can jump to the previous/next
view in your viewing history. This is a convenient way to jump back
to the previous page after you've used a link to jump to a different
page.
Using the Function Tree
A function tree for the QL series is provided on page 4 and
following. You can use this function tree to find the page that
explains an on-screen display or function.
Reference Manual
Zobrazit stránku 0
1 2 3 4 5 6 ... 293 294

Shrnutí obsahu

Strany 1 - Reference Manual

ENHow to Use This Reference ManualThe QL5/QL1 Reference Manual (this document) allows you to search for terms and take advantage of links in the text.

Strany 2 - Contents

SELECTED CHANNEL section Reference Manual10 DIRECT OUT fieldThis field enables you to make Direct Out settings.1 Popup buttonPress this button to ope

Strany 3

Monitor and Cue functions Reference Manual1008 MONITOR FADER fieldEnables you to set and view the monitor fader that adjusts the monitor level.• MONIT

Strany 4 - Function Tree

Monitor and Cue functions Reference Manual101MONITOR screen (Monitor field in Surround mode)If you set a bus to Surround mode in BUS SETUP, the Monito

Strany 5

Monitor and Cue functions Reference Manual1023 DOWNMIX fieldSelect in which field to perform downmixes.•STEREO buttonDownmix in stereo mode.• MONO but

Strany 6

Monitor and Cue functions Reference Manual103DOWNMIX SETUP screenPress the DOWNMIX SETUP button in the SURROUND MONITOR screen to open this screen. Th

Strany 7

Monitor and Cue functions Reference Manual1044 Other CUE groupThese cue signals are operated via buttons displayed on the touch screen. This group is

Strany 8

Monitor and Cue functions Reference Manual105NOTE• The cue signal is sent to the monitor output and PHONES Out jacks regardless of whether the CUE OUT

Strany 9

Monitor and Cue functions Reference Manual1066 CLEAR CUE buttonCancels all cue selections simultaneously. If MIX CUE mode has been selected, all of th

Strany 10 - Reference Manual

Monitor and Cue functions Reference Manual107C CUE LEVEL knobIndicates the output level of the cut out. You can adjust the values by using the [TOUCH

Strany 11 - Channel Strip section

Talkback and Oscillator Reference Manual108Talkback and OscillatorTalkback is a function that sends the signal of the selected INPUT jack to the desir

Strany 12

Talkback and Oscillator Reference Manual109MONITOR screenIn the MONITOR screen, the TALKBACK field enables you to check the current talkback settings,

Strany 13 -  Mute group field

Channel Strip section Reference Manual11Channel Strip sectionThe Channel Strip section located below the touch screen lets you recall and control inpu

Strany 14 - Input and output patching

Talkback and Oscillator Reference Manual1102 TALKBACK ON buttonSwitches talkback on or off.3 ASSIGN field• Channel select buttonsEnable you to select

Strany 15 - PATCH/NAME screen

Talkback and Oscillator Reference Manual1115 OSCILLATOR OUTPUT buttonTurns the oscillator output on or off.OSCILLATOR windowYou can make detailed sett

Strany 16 - 7 Close button

Talkback and Oscillator Reference Manual112Mode = BURST NOISE• LEVEL knob, HPF knob, and LPF knob...Same as in PINK NOISE mode.• WIDT

Strany 17

Meters Reference Manual113MetersThis chapter explains the METER screen that shows the input and output level meters for all channels.Operations in the

Strany 18 - CH SELECT screen

Meters Reference Manual114Fader level and meter displayThis area displays the meter and fader for each channel.1 Channel numberIndicates the channel n

Strany 19 - INSERT screen (8ch)

Meters Reference Manual115 For INPUT METERFader colorThe channel color is the same as the currently selected MIX/MATRIX bus (SEND MASTER).The positio

Strany 20

Meters Reference Manual1165 CUE OVERRIDE buttonIf this button is switched on, the cue signal set in the CUE screen is sent to the real time analyzer,

Strany 21

Meters Reference Manual117Function Access Area screenIf you set a bus to Surround mode in BUS SETUP, the METER screen in the Function Access Area appe

Strany 22 - DIRECT OUT screen (8ch)

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual118Graphic EQ, Parametric EQ, effects, and Premium RackThis chapter explains how

Strany 23 - Input channels

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual119Virtual rack operationsThis section explains how to mount a GEQ, PEQ, or effec

Strany 24

Channel Strip section Reference Manual12• If GAIN KNOB FUNCTION is set to DIGITAL GAIN, the DIGITAL GAIN knob will appear instead of knob 1, and indic

Strany 25 -  When selecting the NAME tab

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual1204 INPUT PATCH buttonIf the type is EFFECT, two buttons (L/R) will appear. If t

Strany 26 - Making HA (Head Amp) settings

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual121• If nothing is mounted:Press this area to open the RACK MOUNTER window, in wh

Strany 27 - GAIN/PATCH window (8ch)

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual1227 Link indicatorIndicates that an odd-numbered rack and even-numbered rack of

Strany 28

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual123Inserting a GEQ in a channelThis section explains how to insert a GEQ into the

Strany 29 - GAIN/PATCH window

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual1244 RACK LINK buttonPress this button to open the RACK LINK window, in which you

Strany 30 - STEREO/MONO bus

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual125Using the 31BandGEQYou will use the Channel Strip section’s faders 1–8 and [ON

Strany 31 - TO STEREO/MONO window (8ch)

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual126Using the Flex15GEQYou will use the Channel Strip section’s faders and [ON] ke

Strany 32 - TO STEREO/MONO window

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual127 Inserting a PEQ in a channelThis section explains how to insert a PEQ into t

Strany 33

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual128• RESET BOTH buttonThe parameters of both will be initialized, and then linked

Strany 34 - MATRIX bus

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual129PEQ EDIT window (HPF/LPF NOTCH)1 Attenuation select buttonThere are four types

Strany 35 - MIX SEND/MATRIX SEND window

Channel Strip section Reference Manual13If the destination bus is VARI (stereo):If a pair of buses (odd-numbered and even-numbered) are in stereo, the

Strany 36 - SENDS ON FADER mode

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual130Inserting Automixer in channels post-faderThis section explains how to mount A

Strany 37 - INPUT DELAY window (8ch)

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual131When increasing the weight setting in one channel• The value displayed in th

Strany 38

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual132Editing the internal effectsThe internal effects of the QL series console can

Strany 39 - 2 LR-MONO SELECT button

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual133Using an internal effect via send and returnThis section explains how to use a

Strany 40 - SELECTED CHANNEL VIEW screen

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual134Inserting an internal effect into a channelThis section explains how to insert

Strany 41 - OVERVIEW screen

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual135EFFECT EDIT windowAllows you to adjust the effect parameters.NOTE• For details

Strany 42 - SURROUND PAN 1CH screen

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual136 PLAY/RECThis field appears if FREEZE is selected as the effect type.• PLAY b

Strany 43 - 2 L/R F/R switch button

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual137NOTE• If you specify “CURRENT PAGE” in the PARAMETER 1 column in the USER DEFI

Strany 44 - Channel library operations

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual138NOTE• If the EFFECT EDIT popup window used to set TAP TEMPO is open, this popu

Strany 45 - OUTPUT channels

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual139Using the Freeze effectThis section explains how to use the “FREEZE” effect ty

Strany 46

Input and output patching Reference Manual14Input and output patchingThis chapter explains how to edit the input patching and output patching, how to

Strany 47 - MONO bus

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual140Using the Premium RackThe procedure to set up the I/O patches for the rack are

Strany 48

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual141Editing the Premium Rack parametersEach Premium Rack window includes the follo

Strany 49 - MONO channels to MATRIX buses

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual1427 LF/HF IN buttonTurn LF and HF EQ on or off simultaneously.8 GraphIndicates t

Strany 50 - 9 SEND LEVEL knob

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual143 U76U76 is a processor that emulates a popular vintage compressor used in a w

Strany 51 - OUTPUT PORT screen

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual144 EQ-1AEQ-1A is a processor that emulates a famous passive-type vintage EQ. It

Strany 52 - 9 Level meter

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual1452 SIDECHAIN CUE buttonTurn this button on to monitor the sidechain signal sent

Strany 53

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual146 Buss Comp 369Buss Comp 369 emulates a standard bus compressor that has been

Strany 54 - EQ and Dynamics

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual1476 COMP GAINCompressor make-up gain. Applied before the limiter.7 COMP RATIOCom

Strany 55

Graphic EQ, Parametric EQ, effects, and Premium Rack Reference Manual148Using the graphic EQ, parametric EQ, effect, and Premium Rack libraries GEQ/P

Strany 56 - HPF/EQ window (8ch)

I/O devices and external head amps Reference Manual149I/O devices and external head ampsThis chapter explains how to use an I/O device or an external

Strany 57 - Using dynamics

Input and output patching Reference Manual15Changing the input patch settingsNOTE• You can also select an input port from the GAIN/PATCH window.• The

Strany 58

I/O devices and external head amps Reference Manual150DANTE INPUT PATCH windowDisplayed when you press the DANTE INPUT PATCH button in the I/O DEVICE

Strany 59 - ST IN (QL1), OUTPUT)

I/O devices and external head amps Reference Manual1512 Port select buttonsSelect the input port.3 CLOSE buttonCompletes the settings and closes the w

Strany 60 - Dynamics library

I/O devices and external head amps Reference Manual152I/O DEVICE screen (I/O page)1 Display switch buttonsPress one of these buttons to view the corre

Strany 61 - Channel Job

I/O devices and external head amps Reference Manual153 RMio64-D displayDisplays the RMio64-D panel. You can press the buttons to change settings.1 MA

Strany 62

I/O devices and external head amps Reference Manual154I/O DEVICE HA windowDisplayed when you press the rack in which the I/O device on the head amp si

Strany 63 - Mute group

I/O devices and external head amps Reference Manual155I/O DEVICE screen (AMP page)1 Display switch buttonsPress one of these buttons to view the corre

Strany 64 - 4 NAME EDIT button

I/O devices and external head amps Reference Manual1563 DANTE SETUP buttonPress this button to open the DANTE SETUP window, in which you can make sett

Strany 65 - Using mute groups

I/O devices and external head amps Reference Manual157Connecting the QL series console to an SB168-ESTo remotely control the SB168-ES from the QL seri

Strany 66 - Using the Mute Safe function

I/O devices and external head amps Reference Manual158Remotely controlling an external head ampAn external head amp (“external HA”) connected via MY16

Strany 67 - RECALL SAFE MODE window

I/O devices and external head amps Reference Manual1595 VIEW switch buttonsSwitch the virtual rack display between SB168-ES and AD8HR. Select the view

Strany 68 - 6 Selected channel display

Input and output patching Reference Manual164 Category select listSelects the category of input port. The categories correspond to the following input

Strany 69 - Channel Link function

I/O devices and external head amps Reference Manual160 Remotely controlling an external HA from the input channels on a QL series consoleYou will be

Strany 70 - 2 Link indicator

MIDI Reference Manual161MIDIThis chapter explains how to transmit MIDI messages from an external device to the QL series console to control the QL con

Strany 71 -  Channel link operations

MIDI Reference Manual162MIDI/GPI screen (MIDI SETUP page)You can select the type of MIDI messages that will be transmitted and received, and choose th

Strany 72

MIDI Reference Manual163MIDI SETUP window (for port selection)Here you can select the port that will be used to transmit and receive MIDI messages. Th

Strany 73 - CH LINK SET window

MIDI Reference Manual164Using program changes to recall scenes and library itemsThe QL series console lets you assign a specific event (scene recall o

Strany 74 - CH COPY MODE window

MIDI Reference Manual165• Multi mode (when the MULTI button is on):Program changes of all MIDI channels will be transmitted and received. (The transmi

Strany 75 - 4 CLOSE button

MIDI Reference Manual1661 TYPE fieldEnables you to select the type of event.The following table lists the events you can select.2 DESTINATION fieldEna

Strany 76 - CH MOVE MODE window

MIDI Reference Manual167MIDI/GPI screen (CONTROL CHANGE page)You can specify how Control Changes will be transmitted and received, and specify the eve

Strany 77 - About Mix Minus

MIDI Reference Manual168MIDI CONTROL CHANGE windowDisplay this window by pressing any event in the CONTROL CHANGE page. In this window, you can specif

Strany 78

Recorder Reference Manual169RecorderThis chapter explains the functionality and operation of the recorder.About the USB memory recorderThe QL series c

Strany 79 - Scene memory

Input and output patching Reference Manual17PATCH/NAME screen1 PATCH buttonIndicates the port that is patched to the output channel. If you press this

Strany 80 - Storing and recalling scenes

Recorder Reference Manual170RECORDER screen (when selecting the USB tab)In this screen you can assign signals to the input and output of the USB memor

Strany 81 - SCENE LIST window

Recorder Reference Manual171Channels that can be patched to the recorder’s outputs• CH1–64 (QL5), CH1–32 (QL1)... INPUT chan

Strany 82 - Recalling a scene

Recorder Reference Manual1725 REC RATE buttonSwitches the recording rate.You can choose 96 kbps, 128 kbps, or 192 kbps. Higher bit rates will improve

Strany 83

Recorder Reference Manual173Playing back audio files from a USB flash driveYou can play back audio files that have been saved on your USB flash drive.

Strany 84 - Editing scene memories

Recorder Reference Manual1744 Sub-directoryIndicates each song’s track number, the name of upper level directory, and whether a sub-directory exists (

Strany 85 - Clearing a scene

Recorder Reference Manual175RECORDER screen (when selecting the USB tab)1 SONG TITLE/FILE NAME EDIT buttonEnables you to edit the title of the song se

Strany 86 - Inserting a scene

Recorder Reference Manual176Word clock settingsIn a Dante network, the master device supplies accurate word clock to other devices on the network. If

Strany 87 - GLOBAL PASTE window

Recorder Reference Manual177Setting up Dante ControllerConnect the network port of the computer to a GbE-compatible network switch. Configure the comp

Strany 88

Recorder Reference Manual178Using the QL console with Nuendo LiveThe QL series consoles can operate in an integrated manner with Steinberg’s Nuendo Li

Strany 89 - FOCUS RECALL window

Recorder Reference Manual179 Transport fieldHere you can operate the transport of Nuendo Live.7 GO TO PROJECT START buttonReturns the location to the

Strany 90 - Using the Fade function

Input and output patching Reference Manual18CH SELECT screen1 Category select listSelect the category of the channel. The categories correspond to the

Strany 91 - FADE TIME window

Recorder Reference Manual1801 Setup method select buttonsChoose one of the following methods by which to specify DVS or Dante Accelerator.• NO ASSIGN

Strany 92 - 2 CURRENT SETTING field

Recorder Reference Manual181NOTE• Depending on the firmware version, Dante Accelerator might not support redundant networking. Refer to the following

Strany 93 - 4 CURRENT SETTING field

Setup Reference Manual182SetupAbout the SETUP screenThe SETUP screen enables you to set various parameters that apply to the entire QL console. To acc

Strany 94 - Using Preview mode

Setup Reference Manual183 BUS SETUP fieldThis field enables you to make bus-related settings.D BUS SETUP buttonPress this button to open the BUS SETU

Strany 95

Setup Reference Manual184If you set Surround mode, the BUS SETUP screen appears as shown below. DATE/TIME buttonPress this button to open the DATE/TI

Strany 96

Setup Reference Manual185User settingsUser Level settings allow you to restrict the parameters that can be operated by each user, or to change the set

Strany 97 - Using the Monitor function

Setup Reference Manual186Setting the Administrator passwordWith the factory settings, the Administrator password is not set, meaning that anyone can l

Strany 98

Setup Reference Manual187CREATE USER KEY window1 USER NAMEDisplays the user name. Press this area to access a keyboard window, in which you can enter

Strany 99 - MONITOR window

Setup Reference Manual188 Logging-in as Guest Logging-in as a UserTo log-in as a User, you will use a user authentication key saved in the console o

Strany 100 - A ASSIGN field

Setup Reference Manual189NOTE• If no password has been set, you will simply be logged-in in step 6 when you press the LOAD button.• If the password wa

Strany 101 - Monitor and Cue functions

Input and output patching Reference Manual19INSERT/DIRECT OUT window (1ch) INSERT fieldThis field enables you to make insert settings. Press one of t

Strany 102 - MONITOR SOURCE SETUP screen

Setup Reference Manual190Changing the user levelYou can view or change the user level.• Administrator...The Administrator does not have a

Strany 103 - Using the Cue function

Setup Reference Manual191• WITH SEND ... Restricts operation of that channel’s send parameters.(From MIX, From MATRIX)• DCA MASTE

Strany 104 - Operating the Cue function

Setup Reference Manual192PreferencesFollow the steps below to make various settings for the QL console operating environment, such as how windows appe

Strany 105 - MONITOR screen

Setup Reference Manual193• IDENTIFY I/O DEVICE PORT BY [SEL]Specifies whether to enable a function that allows you to identify the I/O device port con

Strany 106 - CUE window

Setup Reference Manual194USER DEFINED keysThis section explains how to assign the desired functions to the USER DEFINED keys in the USER DEFINED KEYS

Strany 107 - CUE screen (Surround mode)

Setup Reference Manual195Switching banks for USER DEFINED key settingsYou can register the USER DEFINED key settings (12 keys for QL series consoles)

Strany 108 - Talkback and Oscillator

Setup Reference Manual196EDITOR CONTROLMASTER —Access the corresponding screen of QL Editor.SENDS ON FADER —OVERVIEWCH 1-16 {QL5/QL1}CH17-32 {QL5/QL1}

Strany 109 - TALKBACK window

Setup Reference Manual197HOMESELECTED CH VIEW — Displays the SELECTED CHANNEL VIEW screen.OVERVIEW — Displays the OVERVIEW screen. TOGGLE —Each press

Strany 110 - Using the Oscillator function

Setup Reference Manual198RECORDER DIRECT PLAYNO ASSIGN The specified audio file will be played once from the beginning.Audio files to be played should

Strany 111 - OSCILLATOR window

Setup Reference Manual199*1) QL5: CH1-CH64, QL1: CH1-CH32, ST IN 1L-ST IN 8R, MIX1-MIX16, MTRX1-MTRX8, ST L, ST R, MONO*2) QL5: CH1-CH64, QL1: CH1-CH3

Strany 112 - 5 OSCILLATOR OUTPUT button

Contents Reference Manual2ContentsHow to Use This Reference Manual ... 1Functi

Strany 113 - OUTPUT METER screen

Input and output patching Reference Manual202 INSERT ON/OFF buttonSwitches the insert on or off. The currently-specified insert point setting appears

Strany 114 - SHOW SEND LEVEL button

Setup Reference Manual200NOTE• If you are logged-in as the Administrator, you can also turn on the FOR GUEST button to access the SOFTWARE USER DEFINE

Strany 115 - RTA METER screen

Setup Reference Manual201*1) SELECTED CH, Automixer ch1-6*2) SELECTED CH, QL5: CH1-CH64, QL1: CH1-CH32, ST IN 1-ST IN 8, MIX1-MIX16, MTRX1-MTRX8, STER

Strany 116 - METER screen (Surround mode)

Setup Reference Manual202Custom fader bankGroups that organize channels routed to the top-panel faders are called “fader banks.”There are input and ou

Strany 117 - Function Access Area screen

Setup Reference Manual203Custom fader bank settings for individual scenesCustom fader bank settings can be stored/recalled for individual scenes. For

Strany 118 - Premium Rack

Setup Reference Manual204Locking the consoleUnlocking the consoleNOTEIf you are logged-in as a user for whom no password is set, the console will be u

Strany 119 - Virtual rack operations

Setup Reference Manual205SAVE/LOAD windowThe list will show the files and sub-directories that have been saved.1 COPY buttonCopies a file into a memor

Strany 120 - 6 Rack container

Setup Reference Manual206C WITH DANTE SETUP AND I/O DEVICE buttonIf this is off, the DANTE SETUP and I/O device settings as well as word clock setting

Strany 121

Setup Reference Manual207• SETUP tabThe following table lists the items that you can select.NOTEWhen the output port items are saved individually, cha

Strany 122 - Graphic EQ operations

Setup Reference Manual208LOAD SELECT screen1 TYPE fieldIndicates the type of data to be loaded. The view will vary depending on the tab you select.• A

Strany 123 - GEQ EDIT window

Setup Reference Manual209• ADMIN tabThe following table lists the items that you can select.2 SOURCE fieldThis area lists the data that is saved on th

Strany 124 - 2 HOLD button

Input and output patching Reference Manual21Directly outputting an INPUT channelThe signal of an INPUT channel can be output directly from an OUTPUT j

Strany 125 - GEQ EDIT window (31BandGEQ)

Setup Reference Manual210 Copying and pasting a fileFollow the steps below to copy a desired file into buffer memory, and then paste it with a differ

Strany 126 - Parametric EQ operations

Setup Reference Manual211Recovering after overcurrent at the USB portEven if the connection with the USB device was stopped because an overcurrent con

Strany 127 - PEQ EDIT window

Setup Reference Manual212WORD CLOCK/SLOT window MASTER CLOCK SELECT field1Master clock frequency displayIndicates the frequency (44.1 kHz or 48 kHz)

Strany 128 - PEQ EDIT window (8PEQ)

Setup Reference Manual213• UNKNOWN (black)This indicates that the clock status cannot be detected because no external device is connected or because t

Strany 129 - About AUTOMIXER

Setup Reference Manual214NOTE• In Surround mode, you cannot use cascade output on MIX buses 1-6. In addition, if you have selected 5.1 SOLO in CUE mod

Strany 130 - Using Automixer

Setup Reference Manual215• Scene store operations• DIMMER (MONITOR screen) operations• Panel LED and display brightness (SETUP screen) operations• Mas

Strany 131

Setup Reference Manual216Basic settings for MIX buses and MATRIX busesFollow the steps below to change the basic settings for MIX buses and MATRIX bus

Strany 132 - Editing the internal effects

Setup Reference Manual2174 PAN LINK buttonThis button appears if SIGNAL TYPE is set to STEREO and the bus type is set to VARI. If the button is on, th

Strany 133

Setup Reference Manual2185 SCREENAdjusts the brightness of the touch screen.If the brightness is set to lower than level 2, the QL will start up next

Strany 134 - 2 Input/output meters

Setup Reference Manual219NETWORK window1 IP ADDRESSSpecifies an address that identifies an individual device on the Internet or LAN network.2 GATEWAY

Strany 135 - EFFECT EDIT window

Input and output patching Reference Manual22DIRECT OUT screen (8ch)1 DIRECT OUT ON buttonSwitches the Direct Out on or off. The currently-selected Dir

Strany 136 - Using the Tap Tempo function

Setup Reference Manual220DANTE SETUP window (SETUP page)1 STATUS indicatorsShow the operating status of the QL series console and the Dante network.2

Strany 137

Setup Reference Manual221• With QL V1.07 and later, when settings are initialized, including Dante audio network settings, or a firmware update is ins

Strany 138

Setup Reference Manual222 Connection examples and latency settingsDaisy chain connectionsSimple 64-in/48-outDaisy chain connectionsFOH and monitor co

Strany 139 - Using the Premium Rack

Setup Reference Manual223Daisy chain connections256-ch HA remote (maximum size)Redundant connectionsTwo consoles are sharing 256-ch HA remote (maximum

Strany 140

Setup Reference Manual224Mounting an I/O device on the Dante audio networkHere’s how to select which of the multiple I/O devices on the Dante audio ne

Strany 141

Setup Reference Manual225 When the setup method select button is DEVICE LISTTo mount by choosing from a list of the I/O devices on the Dante audio ne

Strany 142

Setup Reference Manual226NOTE• If there is one I/O device, set the I/O device’s UNIT ID to “1.”• If multiple devices are connected, assign the ID numb

Strany 143

Setup Reference Manual227REMOTE HA settingsHere’s how to select which of the multiple HA devices on the Dante audio network will be mounted so that th

Strany 144

Setup Reference Manual228Displaying the device statusYou can use the touch screen to verify the status of a connected QL series or R-series unit (exce

Strany 145

Setup Reference Manual229 Error messagesThe SYSTEM indicators will remain lit/blinking cyclically as follows until the problem has been resolved.If s

Strany 146 - Linked in reverse

Input channels Reference Manual23Input channelsThis chapter explains various operations for input channels.Signal flow for input channelsThe input cha

Strany 147

Setup Reference Manual230 Information messagesThe indicators will remain lit /blinking cyclically to report the status.If the orange [SYNC] indicator

Strany 148 - Premium Rack libraries

Setup Reference Manual231NOTE• With latched operation, the function will switch between active and inactive each time a trigger is input from the exte

Strany 149 - Using an I/O device

Setup Reference Manual232MIDI/GPI screen (GPI page)1 GPI OUT status indicatorThis indicates the status of the voltage that is being output from each G

Strany 150 - PORT SELECT window

Setup Reference Manual233Using FADER STARTMake FADER START settings if you want a device connected to a GPI OUT port to operate in tandem with fader o

Strany 151 - OUTPUT PATCH window

Setup Reference Manual234NOTE• The THRESHOLD values specified by the UPSTROKE/DOWNSTROKE knobs are common to all GPI OUT ports. However, you can indiv

Strany 152 - I/O DEVICE screen (I/O page)

Help function Reference Manual235Help functionYou can view Help files (file extension .xml) provided by Yamaha. For the latest information on help fil

Strany 153

Help function Reference Manual236Using USER DEFINED keys to recall Help directly Assigning the Help function to USER DEFINED keys Recalling the HELP

Strany 154 - Remotely controlling an amp

Other functions Reference Manual237Other functionsThis chapter explains various functions of QL series consoles that are not covered in other chapters

Strany 155 - I/O DEVICE screen (AMP page)

Other functions Reference Manual238Adjusting the faders (Calibration function)Depending on the environment in which you use the QL series console, dis

Strany 156 - 3 DANTE SETUP button

Other functions Reference Manual239• INPUT PORT TRIM (Fine adjustment of the analog input gain)Access the INPUT PORT TRIM window, and make fine adjust

Strany 157 -  Ring connection

Input channels Reference Manual24• INSERT (INPUT channels (monaural) only)You can patch the desired output/input ports to insert an external device su

Strany 158 - 3 Virtual racks

Other functions Reference Manual240Adjusting the LED color (Calibration function)If necessary, you can adjust the LED colors. Adjust the LED colors on

Strany 159 - EXTERNAL HA window

Other functions Reference Manual241Adjusting the contrast of the channel name displayIf necessary, you can adjust the contrast of the channel name dis

Strany 160 - INTERNAL HA window

Warning/Error Messages Reference Manual242Warning/Error MessagesMessage Meaningxxx Parameters Copied. Parameter xxx was copied to the copy buffer.xxx

Strany 161 - Basic MIDI settings

Warning/Error Messages Reference Manual243MIDI: Rx Buffer Full! Too much data is being received at the MIDI input port.MIDI: Tx Buffer Full! Too much

Strany 162

Warning/Error Messages Reference Manual244Too Large Files! Loading Failed.Loading is not possible because the bitmap file is too large. The maximum su

Strany 163 - 2 OK button

Index Reference Manual245IndexNumerics8BandPEQ ... 126AAudio file (links to a scene recall)...

Strany 164 - 2 PROGRAM CHANGE MODE field

ENContentsEQ Library List... 2DYNAMICS Library List ...

Strany 165 - MIDI PROGRAM CHANGE window

Data List2EQ Library List# TitleParameterLOW L-MID H-MID HIGH01 Bass Drum 1PEAKING PEAKING PEAKING H.SHELFG +3.5 dB –3.5 dB 0.0 dB +4.0 dBF 100 Hz 26

Strany 166

Data List3DYNAMICS Library List33 Bass Drum 3PEAKING PEAKING PEAKING PEAKINGG +3.5 dB –10.0 dB +3.5 dB 0.0 dBF 118 Hz 315 Hz 4.25 kHz 20.0 kHzQ 2.0 1

Strany 167

Data List4* At fs=44.1 kHz18 E. B. Slap COMPRESSORThreshold (dB) –12Ratio ( :1) 1.7Attack (ms) 6Out gain (dB) 4.0Knee hardRelease (ms) 13319 Syn. B

Strany 168 - MIDI CONTROL CHANGE window

Input channels Reference Manual25 When selecting the ICON tab 1Channel color select buttonsSelect a channel color.2 Icon select buttonsSelect a chann

Strany 169 - Recorder

Data List5Dynamics ParametersDynamics Parameters are the following types. GATEA gate attenuates signals below a set THRESHOLD level by a specified a

Strany 170 - CH SELECT window

Data List6 COMPRESSORThe COMP processor attenuates signals above a specified THRESHOLD by a specified RATIO.The COMP processor can also be used as a

Strany 171 - 3 4A0987 5 6

Data List7 COMPANDER HARD (COMPANDER-H), COMPANDER SOFT (COMPANDER-S)The hard and soft companders combine the effects of the compressor, expander an

Strany 172

Data List8Effects Parameters REV-X HALL, REV-X ROOM, REV-X PLATENewly-developed two input, two output reverb algorithm. Delivers dense and rich reve

Strany 173 - RECORDER screen

Data List9 STEREO REVERBTwo input, two output stereo reverb. EARLY REF.One input, two output early reflections. GATE REVERB, REVERSE GATEOne input

Strany 174 - Editing the title list

Data List10 MOD. DELAYOne input, two output basic repeat delay with modulation. DELAY LCROne input, two output 3-tap delay (left, center, right).

Strany 175 - Required devices and software

Data List11 FLANGETwo input, two output flange effect. SYMPHONICTwo input, two output symphonic effect. PHASERTwo input, two output 16-stage phase

Strany 176 - Dante Accelerator settings

Data List12 DYNA.PHASERTwo input, two output dynamically controlled phaser. HQ.PITCHOne input, two output high-quality pitch shifter. DUAL PITCHTw

Strany 177 - Audio recording and playback

Data List13 AUTOPANTwo input, two output autopanner. ROTARYOne input, two output rotary speaker simulator. RING MOD.Two input, two output ring mod

Strany 178 - Recording into a project

Data List14 REV+CHORUSOne input, two output reverb and chorus effects in parallel. REVCHORUSOne input, two output reverb and chorus effects in ser

Strany 179 - NUENDO LIVE SETUP window

Input channels Reference Manual26Making HA (Head Amp) settingsYou can make HA (Head Amp) related settings (phantom power on/off, gain, phase) for the

Strany 180

Data List15 REV+SYMPHO.One input, two output reverb and symphonic effects in parallel. REVSYMPHO.One input, two output reverb and symphonic effect

Strany 181 - Playing a multi-track project

Data List16 DELAYER.One input, two output delay and early reflections effects in series. DELAY+REVOne input, two output delay and reverb effects i

Strany 182 - About the SETUP screen

Data List17 DISTDELAYOne input, two output distortion and delay effects in series. MULTI FILTERTwo input, two output 3-band multi-filter (24 dB/oc

Strany 183 - E SURROUND SETUP button

Data List18 AMP SIMULATEOne input, two output guitar amp simulator. COMP276This effect emulates the characteristics of analog compressors that are

Strany 184

Data List19 EQUALIZER601This effect emulates the characteristics of 70’s analog equalizers. Re-creating the distortion of typical analog circuits wi

Strany 185 - User settings

Data List20 M.BAND COMPTwo input, two output 3-band compressor, with individual solo and gain reduction metering for each band.Premium Rack Processo

Strany 186

Data List21 U76This models a well-known vintage compressor/limiter used in a wide range of situations. Opt-2AThis processor emulates a well-known v

Strany 187 - Logging-in

Data List22 Automixer ParametersParameters that can be assigned to control changesParameter Range DescriptionGroup a, b, c Channel control field gro

Strany 188 -  Logging-in as a User

Data List23INPUT ATT INPUTCH 1–CH 64*1STIN1L–STIN8RINPUT DYNAMICS1ONCH 1–CH 64*1STIN1L–STIN8RATTACKTHRESHOLDRANGEHOLD HHOLD LDECAY/RELEASE HDECAY/REL

Strany 189 - Changing the password

Data List24OUTPUT EQONMIX 1–MIX 16MATRIX 1–MATRIX 8STEREO L–MONO(C)LOW QLOW FREQLOW GAINLOW MID QLOW MID FREQLOW MID GAINHIGH MID QHIGH MID FREQHIGH

Strany 190 - USER SETUP window

Input channels Reference Manual273 INPUT PORT buttonIndicates the port that is assigned to the channel. Press this button to display the PORT SELECT w

Strany 191

Data List25STEREO TO MATRIXMATRIX 1 POINT–MATRIX 8 POINTSTEREO L–MONO(C)MATRIX 1 ON–MATRIX 8 ONMATRIX 1 LEVEL H–MATRIX 8 LEVEL HMATRIX 1 LEVEL L–MATR

Strany 192 - Preferences

Data List26NRPN parameter assignmentsParameter From (HEX) To (HEX)FADERINPUT 0000 0057MIX1-16, MATRIX, STEREO LR0060 007DINPUT to MIX9-16 LEVELMIX9 S

Strany 193

Data List27INPUT to MIX9/10-15/16 PANMIX9/10 20F6 214DMIX11/12 2156 21ADMIX13/14 21B6 220DMIX15/16 2216 226DINPUT to MATRIX1/2, 3/4 PANMATRIX1/2 2276

Strany 194 - USER DEFINED keys

Data List28MONO EQON 325E 3262LOW Q 3264 3268LOW FREQ 326A 326ELOW GAIN 3270 3274LOW MID Q 3276 327ALOW MID FREQ 327C 3280LOW MID GAIN 3282 3286HIGH

Strany 195

Data List29SLOT OUT DELAYON 3CD6 3D05TIME HIGH 3D06 3D35TIME LOW 3D36 3D65OMNI OUT DELAYON 3D66 3D6DTIME HIGH 3D76 3D7DTIME LOW 3D86 3D8DDIGITAL OUT

Strany 196

Data List30Mixing parameter operation applicabilityThis table indicates which settings affect the behavior of each input channel and output channel p

Strany 197

Data List31*1 These parameters can be linked between L and R of ST IN channels 1–8.*2 Applies to parameters for which the MIX channel 1–16 individual

Strany 198

Data List32 MIX Channels*4 These parameters are available if “FADER/ON” or “PROCESSING” for the Send source channel is set to ON. At that time, “WIT

Strany 199 - USER DEFINED knobs

Data List33*11 Balance only*12 For GLOBAL PASTE, the MIX, MATRIX, STEREO, and MONO settings of each channel will be set in common as the OUTPUT.*13 L

Strany 200

Data List34*9 Applies to ALL only when using GLOBAL PASTE, and only to ON/OFF.*11 Balance only*12 For GLOBAL PASTE, the MIX, MATRIX, STEREO, and MONO

Strany 201

Input channels Reference Manual282 PATCH buttonPress this button to display the PORT SELECT window to patch the input port to the input channel.PORT S

Strany 202 - Custom fader bank

Data List35 DCA*9 Applies to ALL only when using GLOBAL PASTE, and only to ON/OFF. MUTEParameterRECALL SAFE, FOCUS RECALL, GLOBAL PASTEUSER LEVELAL

Strany 203

Data List36MIDI Data FormatThis section explains the format of the data that the QL series is able to understand, send, and receive.1 CHANNEL MESSAGE

Strany 204 - Unlocking the console

Data List372 SYSTEM REALTIME MESSAGE2.1 SONG SELECT (F3)ReceptionSelect the track number shown in the TITLE LIST screen of the USB memory recorder.2.

Strany 205 - SAVE/LOAD window

Data List38[Conversion from actual data to bulk data]d[0-6]: actual datab[0-7]: bulk datab[0] = 0;for( I=0; I<7; I++){if( d[I]&0x80){b[0] |= 1

Strany 206 - SAVE SELECT screen

Data List394.2.3 Module Name*1) 0: CH1 – 63: CH6472: ST IN 1L – 79: ST IN 4R*2) 256: MIX 1 – 271: MIX 16*3) 512: MATRIX 1 – 519: MATRIX 8*4) 1024: ST

Strany 207

Data List404.4 FUNCTION CALL – LIBRARY ATTRIBUTE –4.4.1 Format (PARAMETER CHANGE)ReceptionData will be received when [PARAMETER CHANGE Rx] is on and

Strany 208 - LOAD SELECT screen

Data List414.5.2 Format (PARAMETER REQUEST)ReceptionThe PARAMETER CHANGE will be sent with Device number [Rx CH] immediately the data is received.4.5

Strany 209 - 1 2 3 4 5

Data List424.8 FUNCTION CALL – CHANNEL –4.8.1 Pair ON/OFF Trigger Format (PARAMETER CHANGE)ReceptionData will be received when [PARAMETER CHANGE Rx]

Strany 210 - Formatting a USB flash drive

Data List43Input/Output SpecificationsAnalog input specifications*1. The sensitivity is the input level required for output at +4dBu (1.23V) or at th

Strany 211 - Word clock and slot settings

Data List44I/O SLOT (1-2) specificationsA Mini-YGDAI card can be inserted into slots 1-2.Only slot 1 supports serial interfaces.Control I/O specifica

Strany 212 - WORD CLOCK/SLOT window

Input channels Reference Manual29GAIN/PATCH window(1–32, 33–64/ST IN (QL5), ST IN (QL1))This window displays the head amp settings of the correspondin

Strany 213 - QL BQL A

Data List45 Dynamic Range. Fs= 48 kHz*1. QL1: INPUT 1-16*2. QL1: OMNI OUT 1-8*3. Dynamic Range are measured with A-weight filter. Sampling Frequen

Strany 214 - 2 CASCADE LINK MODE buttons

Data List46Mixer Basic Parameters Libraries Input Function Output Function Output Port ProcessorName Number TotalScene Memory Preset 1 + User 30

Strany 215

Data List47Pin Assignment ChartGPIPin Signal Name Pin Signal Name1GPO19GPO22 GPO3 10 GPO43GPO511GND4GND12GND5 +5V 13 +5V6 GPI1 14 GPI27 GPI3 15 GPI48

Strany 216 - BUS SETUP window

Data List48M IDI Implementation Chart2014 .Jan 8 :etaD] elosnoC gnixiM latigiD [ AHAMAYModel: QL5/QL1MIDI Implementation ChartVersion: 1.0Function...

Strany 217 - 1 2 3 4 5 6 7

Published 04/2015 MA-B1© 2014 Yamaha CorporationManual Development DepartmentYamaha Manual Libraryhttp://www.yamaha.co.jp/manual/Yamaha Pro Audio G

Strany 218 - Setting the network address

Contents Reference Manual3I/O devices and external head amps ... 149Using an I/O device ...

Strany 219 - NETWORK window

Input channels Reference Manual30Relationship between analog and digital gain while Gain Compensation is onIf Gain Compensation is on, adjusting the a

Strany 220

Input channels Reference Manual31TO STEREO/MONO window (8ch)Here you can control the on/off and pan/balance settings of signals sent from input channe

Strany 221

Input channels Reference Manual326 TO ST PAN/TO ST BALANCE knobFor an INPUT channel (monaural), this acts as a PAN knob that adjusts the left/right pa

Strany 222

Input channels Reference Manual33Signal level when LCR mode is selectedIf LCR mode is selected, the signal level sent to the STEREO (L/R) bus and MONO

Strany 223 - Redundant connections

Input channels Reference Manual34Sending a signal from an input channel to a MIX/MATRIX busThe MIX buses are used mainly for the purpose of sending si

Strany 224 - DANTE SETUP window

Input channels Reference Manual35 If the MIX/MATRIX bus is a stereo busYou can link the main parameters of two adjacent odd/even-numbered MIX/MATRIX

Strany 225

Input channels Reference Manual369 SEND LEVEL knobIndicates the level of signals sent to the selected send destination. You can use the [TOUCH AND TUR

Strany 226 - 3 Device label entry keyboard

Input channels Reference Manual37Channel name display indicationIn SENDS ON FADER mode, ON/OFF is indicated for the channel.On the PREFERENCE page in

Strany 227 - REMOTE HA SELECT window

Input channels Reference Manual382 Channel select buttonThe currently-selected input channel is indicated in blue. Press the button to select the chan

Strany 228 - Messages

Input channels Reference Manual39 LR-MONOThe signals sent to both channels are temporarily set as mono signals. Setting procedureIf a stereo input c

Strany 229 -  Warning messages

Function Tree Reference Manual4Function TreePage numbers in parentheses ( ) are the page numbers of the Owner’s Manual (booklet).MainSELECTED CHANNEL

Strany 230 - Using GPI IN

Input channels Reference Manual40Surround output for input channelsSetting Surround modeYou can enable surround mixes by changing bus settings to Surr

Strany 231 - Using GPI OUT

Input channels Reference Manual415 LFE knobThis sets the level of the LFE (Low Frequency Effects) Channel.Use the SEND knob (MIX 6) of the Selected Ch

Strany 232

Input channels Reference Manual42SURROUND PAN 1CH screenIf you set a bus to Surround mode in BUS SETUP, the SURROUND PAN 1CH screen appears as shown b

Strany 233 - Using FADER START

Input channels Reference Manual43SURROUND PAN screen (1-32, 33-64/ST IN(QL5), ST IN (QL1))If you set a bus to Surround mode in BUS SETUP, the SURROUND

Strany 234 - 5 MODE field

Input channels Reference Manual44TO STEREO/MONO screenIf you set a bus to Surround mode in BUS SETUP, the TO STEREO/MONO 8CH screen for MIX 1-8 appear

Strany 235 - Help function

OUTPUT channels Reference Manual45OUTPUT channelsThis chapter explains output channels (MIX channels, MATRIX channels, STEREO channels, MONO channels)

Strany 236

OUTPUT channels Reference Manual46• ON (On/off)Turns the output channel on or off. If this is off, the corresponding channel will be muted. • MATRIX O

Strany 237 - Other functions

OUTPUT channels Reference Manual47Sending signals from MIX channels to the STEREO/MONO busThere are two ways to send signals to the STEREO bus or MONO

Strany 238 - ∞ dB (all the way down)

OUTPUT channels Reference Manual483 MODE select buttonPress this button repeatedly to toggle between ST/MONO and LCR.4 ST/MONO buttonsThese buttons ar

Strany 239

OUTPUT channels Reference Manual49Sending signals from MIX channels and STEREO/MONO channels to MATRIX busesYou can send a signal from a MIX or STEREO

Strany 240

Function Tree Reference Manual5NOTE• The explanations in this reference manual will use the QL5.• In the case of the QL1, some screens will not show c

Strany 241 - EXIT button

OUTPUT channels Reference Manual506 PRE/POST buttonSwitches the send point of each send-source channel between PRE and POST. If the button is lit, the

Strany 242 - Warning/Error Messages

OUTPUT channels Reference Manual51Correcting delay between channels (Output Delay)This Output Delay function is useful when you want to correct the ti

Strany 243

OUTPUT channels Reference Manual526 DELAY buttonSwitches the output port delay on or off.7 Ø (Phase) buttonSwitches the phase of the signal assigned t

Strany 244

OUTPUT channels Reference Manual53CH SELECT screen1 Category select listSelect the category of the channel. The categories and channels for the PORT T

Strany 245

EQ and Dynamics Reference Manual54EQ and DynamicsEach input channel and output channel on a QL series console provides a four-band EQ and dynamics.EQ

Strany 246 - Data List

EQ and Dynamics Reference Manual554 EQ type select buttonSwitches between TYPE I (an algorithm used in previous Yamaha digital mixers) and TYPE II (an

Strany 247 - EQ Library List

EQ and Dynamics Reference Manual56HPF/EQ window (8ch)This window displays the input channel or output channel EQ settings in groups of 8 channels simu

Strany 248 - DYNAMICS Library List

EQ and Dynamics Reference Manual57Using dynamicsInput channels feature two dynamics processors; output channels feature one dynamics processor.NOTE• T

Strany 249 - * At fs=44.1 kHz

EQ and Dynamics Reference Manual587 Dynamics type buttonsEnables you to select the dynamics type. You can choose from the following dynamics types.• D

Strany 250 - Dynamics Parameters

EQ and Dynamics Reference Manual59DYNAMICS1/2 window (8ch)This window displays the input channel or output channel dynamics settings in groups of 8 ch

Strany 251 -  EXPANDER

SELECTED CHANNEL section Reference Manual6SELECTED CHANNEL sectionThe SELECTED CHANNEL section located at the right of the display corresponds to a ch

Strany 252 - Effect Type List

EQ and Dynamics Reference Manual602 Dynamics parameter areaThis area displays the dynamics type and various meters. Press the area to access the DYNAM

Strany 253 - Effects Parameters

Channel Job Reference Manual61Channel JobThis chapter explains the DCA Group and Mute Group functions that enable you to control the level or muting o

Strany 254 -  STEREO DELAY

Channel Job Reference Manual62DCA/MUTE GROUP ASSIGN MODE windowHere you can specify the channels that will be assigned to each DCA group.1 CLEAR ALL b

Strany 255 -  CHORUS

Channel Job Reference Manual63Controlling DCA groupsUse the DCA faders to control DCA groups. Using DCA groupsUse the strip section to operate the DC

Strany 256 -  DYNA.FLANGE

Channel Job Reference Manual64 Selecting the channels that will belong to a specific mute groupNOTE• You may assign a single channel to more than one

Strany 257 -  TREMOLO

Channel Job Reference Manual655 Mute group select buttonSelects the mute group that you want to assign.6 MUTE SAFE buttonUse this button if you want t

Strany 258 -  DYNA.FILTER

Channel Job Reference Manual66NOTEThe USER SETUP window enables you to limit available functionality by user, and also to make system-wide settings. T

Strany 259 -  REVFLANGE

Channel Job Reference Manual67NOTE• Simply selecting a parameter in step 4 does not enable Recall Safe. To turn Recall Safe on or off, you must also p

Strany 260 -  DELAY+ER

Channel Job Reference Manual685 Channel select buttonSelects the channel for which you want to set the Recall Safe function.NOTESwitching channels usi

Strany 261 -  DELAYREV

Channel Job Reference Manual69*1. The default setting is ALL on.*2. Insert 1 and Insert 2 are set together.*3. ST IN channels do not feature these but

Strany 262 -  DISTORTION

SELECTED CHANNEL section Reference Manual7If the destination bus channels are two mono channels:1 SEND knobAdjusts the send level to the corresponding

Strany 263 -  COMP260S

Channel Job Reference Manual70Linking the desired input channelsThis section explains how to link specific parameters of input channels.NOTEChannel li

Strany 264 -  M.BAND DYNA

Channel Job Reference Manual713 LINK PARAMETER fieldUse the buttons in this field to select the parameters that you want to link. You can do this inde

Strany 265 -  Portico5043

Channel Job Reference Manual72CH LINK MODE window (output channels)You can view the output channels that are linked and specify the parameters that wi

Strany 266 -  Buss Comp 369

Channel Job Reference Manual73 Channel link operations• Linking three or more channelsHold down the link-source [SEL] key and successively press the

Strany 267 -  Automixer Parameters

Channel Job Reference Manual745 CLOSE buttonCloses the window.NOTEIf you use QL5 settings data on the QL1, buttons will be shown crossed-out if they a

Strany 268

Channel Job Reference Manual751 SOURCE CH fieldDisplays the copy-source channel. While this window is displayed, press a [SEL] key on the top panel to

Strany 269

Channel Job Reference Manual76CH MOVE MODE window1 SOURCE CH fieldDisplays the move-source channel. While this window is displayed, press a [SEL] key

Strany 270

Channel Job Reference Manual77NOTEAfter initialization, the TARGET CHs field will be empty (nothing is selected).CH DEFAULT MODE windowEnables you to

Strany 271 - NRPN parameter assignments

Channel Job Reference Manual78NOTEYou can also access the MIX MINUS popup window by pressing the CH JOB button in the Function Access Area, then press

Strany 272

Scene memory Reference Manual79Scene memoryOn QL series consoles, you can assign a name to a set of mix parameter and input/output port patch settings

Strany 273

SELECTED CHANNEL section Reference Manual8 PAN/BALANCE fieldThis field enables you to switch the on/off status of the signal sent from the selected c

Strany 274

Scene memory Reference Manual80Storing and recalling scenesTo store or recall the current mix settings as a scene memory, use the SCENE LIST window.St

Strany 275 -  Input channels

Scene memory Reference Manual81SCENE LIST windowHere you can perform various scene-related operations. This window will appear when you press the SCEN

Strany 276

Scene memory Reference Manual82C RECALL UNDO buttonUndoes the Recall operation. This button is valid only immediately after you perform a Recall opera

Strany 277 -  MIX Channels

Scene memory Reference Manual83Using USER DEFINED keys to recallYou can use the USER DEFINED keys to recall a selected scene with a single keystroke,

Strany 278 -  MATRIX Channels

Scene memory Reference Manual84Editing scene memoriesThis section explains how to sort the scenes stored in scene memory, edit their titles, and copy

Strany 279 -  STEREO, MONO Channels

Scene memory Reference Manual85Scene memory editingThe scenes stored in scene memory can be copied and pasted to other scene numbers, or cleared (eras

Strany 280

Scene memory Reference Manual86Cutting a sceneThis section explains how to cut a scene.When you cut a scene, the numbers of the subsequent scenes will

Strany 281 - MIDI Data Format

Scene memory Reference Manual87GLOBAL PASTE window1 SET BY SEL buttonTurn on this button to add a channel by using the corresponding [SEL] key.2 CLEAR

Strany 282 - 3 SYSTEM EXCLUSIVE MESSAGE

Scene memory Reference Manual88•RACK tabEnables you to choose from GEQ RACK, EFFECT RACK, or PREMIUM RACK. You can individually select an GEQ for a Fl

Strany 283 - 4 PARAMETER CHANGE details

Scene memory Reference Manual89SCENE LIST window1 FOCUS buttonEnables or disables the Focus function for each scene.2 SET popup buttonPress this butto

Strany 284

SELECTED CHANNEL section Reference Manual9 EQ parameter fieldThis field displays the 4-band EQ parameter settings. Press each knob to open the HPF/EQ

Strany 285 - 4.5 EXIST LIBRARY RANGE

Scene memory Reference Manual903 SET BY SEL buttonTurn on this button to add a channel by using the corresponding [SEL] key. To add channels as the ta

Strany 286 - 4.7 FUNCTION CALL – MODULE –

Scene memory Reference Manual91SCENE LIST window (FADE TIME field)1 SET buttonPress this button to open the FADE TIME window, in which you can select

Strany 287 - 4.9 LEVEL METER DATA

Scene memory Reference Manual92Outputting a control signal to an external device in tandem with scene recall (GPI OUT)A control signal can be output t

Strany 288 - Input/Output Specifications

Scene memory Reference Manual93Playing back an audio file that links to a scene recallYou can also specify an audio file that you want to play back fr

Strany 289 - Electrical characteristics

Scene memory Reference Manual94SONG SELECT windowYou can select an audio file you want to link with the scene, and set the offset time. This window wi

Strany 290 -  Sampling Frequency

Scene memory Reference Manual95Similarly, edits for the current scene will be conveyed to the following software and external devices.• QL Editor• Sta

Strany 291 - Mixer Basic Parameters

Monitor and Cue functions Reference Manual96Monitor and Cue functionsThe Monitor function lets you monitor various outputs through your nearfield moni

Strany 292

Monitor and Cue functions Reference Manual97• MONITOR FADERUse the STEREO MASTER fader or MONO MASTER fader to adjust the output level of the MONITOR

Strany 293 - MIDI Implementation Chart

Monitor and Cue functions Reference Manual98MONITOR screenIn the MONITOR screen, the MONITOR field lets you check the current monitor settings, and tu

Strany 294

Monitor and Cue functions Reference Manual99MONITOR windowYou can make detailed settings for monitoring. This screen appears when you press the MONITO

Komentáře k této Příručce

Žádné komentáře