Yamaha V3 Uživatelská příručka stáhnout pdf (Strana 33)

R Remote Version 3 User’s Guide 33

The external device is not

outputting a signal

Output a signal from the source

device and make sure that the SIG

indicators on the appropriate

channels will light.

Phantom power is not being

supplied even though a

condenser microphone is

connected.

Turn the [+48V MASTER] switch

on.

Turn phantom power on for the

corresponding channel.

REFRESH mode is selected

with the CL/QL series not

connected.

Select RESUME mode.

Adjusting the HA gain does not

change the audio level.

Gain compensation is on. If you don’t need gain

compensation,

turn gain

compensation off.

[UNIT ID] rotary switch and

DIP switch settings are not

applied.

The settings were changed

while the power was on.

Turn off the power before changing

the settings.

The R series unit is not

recognized.

Communication is blocked by

the Windows firewall.

Perform the following procedure so

that R Remote is not blocked by

the Windows firewall.

1. Open Control Panel.

2. In the upper right, set "View

by" to [Category].

3. Click [System and Security].

4. Click [Allow an app through

Windows Firewall].

5. In "Allowed apps and

features," select the checkbox

for "Yamaha R Remote" and

also select the checkbox at the

right.

6. Click the [OK] button to close

Control Panel.

The R series unit is

unexpectedly disconnected.

(Mac)App Nap is not

disabled.

Select the [Prevent App Nap]

checkbox.

The computer has entered

sleep mode.

Set the computer so that it does

not enter sleep mode.

1 2 ... 28 29 30 31 32 33 34

Komentáře k této Příručce

Žádné komentáře