Yamaha DTX500 Průvodce nastavením stáhnout pdf (Strana 2)

APPENDIX : How to setup the trigger setup settings?

1. Press the [SHIFT] + [DRUM KIT] buttons to call up the Trigger Setup Select page (TRG1). The currently

selected Trigger Setup is indicated in the display.

* If you want to edit a different trigger setup, use the jog dial and select the setup here.

2. Press the [<]/[>] buttons to change pages(TRG2 through TRG8) and move the ﬂashing cursor to the

parameter you want to set.

*To select the Trigger Input (input jack) you want to edit, simply hit the pad you want to edit or use the

[SHIFT] + [<]/[>] buttons.

3. Rotate the jog dial to change the setting as listed in the tables above.

4. Press the [SAVE/ENTER] button.

5. Rotate the jog dial to select the destination trigger setup number (8–11).

*If you want to change the Trigger Setup name, press the [<]/[>] buttons to move the ﬂashing cursor to the

character you want to edit, then rotate the jog dial to select a character.

6. Press the [SAVE/ENTER] button again. A prompt appears asking you to confirm the Store operation.

7. Press the [SAVE/ENTER] button once more to actually execute the Store operation.

*For more information, please refer to the DTX500 Owner’s Manual.

1 2

Maryse Martin 03 Mar 2025 | 18:30:06

bien

Yamaha DTX500 Průvodce nastavením Strana 2