Yamaha WF192 Specifikace stáhnout pdf (Strana 53)

1.2.8 Pan

Messages which control the stereo panning position of

each Part.

CNTRL# PARAMETER DATA RANGE

10 Pan 0...127

A setting of 0 = extreme left position, and 127 = extreme

right position.

1.2.9 Expression

Messages which control intonation expression of each

Part.

CNTRL# PARAMETER DATA RANGE

11 Expression 0...127

A setting of 0 = minimum expression volume, and 127 =

maximum expression volume.

1.2.10 Control Change 13

CNTRL# PARAMETER DATA RANGE

13 Control Change 13 0...127

Effective only for S-VA voices.

1.2.11 Hold1

Messages which control sustain on/off.

CNTRL# PARAMETER DATA RANGE

64 Hold1 0...127

Settings between 0-63 = sustain off, and settings

between 64-127 = sustain on.

1.2.12 Portamento

Messages which control portamento on/off.

CNTRL# PARAMETER DATA RANGE

65 Portamento 0...127

Settings between 0-63 = portamento off, and settings

between 64-127 = portamento on.

The parameter 1.2.5 Portamento Time controls the

portamento speed.

1.2.13 Sostenuto

Messages which control sostenuto on/off.

CNTRL# PARAMETER DATA RANGE

66 Sostenuto 0...127

Holding specific notes and then pressing and holding the

sostenuto pedal will sustain those notes as you play

subsequent notes, until the pedal is released.

Settings between 0-63 = sostenuto off, and settings

between 64-127 = sostenuto on.

Ineffective for S-VA voices.

1.2.14 Soft Pedal

Messages which control soft pedal on/off.

CNTRL# PARAMETER DATA RANGE

67 Soft Pedal 0...127

Notes played while holding the soft pedal will be

dampened. Settings between 0-63 = soft pedal off, and

settings between 64-127 = soft pedal on.

1.2.15 Harmonic Content

Messages which adjust the resonance set for each

Voice.

CNTRL# PARAMETER DATA RANGE

71 Harmonic Content 0...127 (0 : -64, 64 : +0, 127 : +63)

The value set here is an offset value which will be added

to or subtracted from the Voice data.

Higher values will result in a more resonant sound.

Depending on the Voice, the effective range may be

narrower than the range available for adjustment.

1.2.16 Release Time

Messages which adjust the envelope release time set for

each Voice.

CNTRL# PARAMETER DATA RANGE

72 Release Time 0...127 (0 : -64, 64 : +0, 127 : +63)

The value set here is an offset value which will be added

to or subtracted from the Voice data.

1.2.17 Attack Time

Messages which adjust the envelope attack time set for

each Voice.

CNTRL# PARAMETER DATA RANGE

73 Attack Time 0...127 (0 : -64, 64 : +0, 127 : +63)

The value set here is an offset value which will be added

to or subtracted from the Voice data.

1.2.18 Brightness

Messages which adjust the filter cutoff frequency set for

each Voice.

CNTRL# PARAMETER DATA RANGE

74 Brightness 0...127 (0 : -64, 64 : +0, 127 : +63)

The value set here is an offset value which will be added

to or subtracted from the Voice data.

Lower values will result in a softer sound.

Depending on the Voice, the effective range may be

narrower than the range available for adjustment.

1.2.19 Portamento Control

Messages which apply a portamento between the

currently sounding note and the subsequent note.

CNTRL# PARAMETER DATA RANGE

84 Portamento Control 0...127

Portamento Control is transmitted specifying the Note On

Key of the currently-sounding note.

Specify a Portamento Source Key number between 0-

127.

When a Portamento Control message is received, the

currently sounding pitch will change with a Portamento

Time of 0 to the next Key On key on the same channel.

For example, the following settings would apply a

portamento from note C3 to C4.

90 3C 7F C3 = Key On

B0 54 3C Source Key number set to C3

90 48 7F C4 = Key On (When C4 = on, C3 is

raised by a portamento to C4.)

Even if the Multi Part parameter Rcv PORTAMENTO

(Table 1-4) = OFF, the Portamento Control message will

be received.

Ineffective for S-VA voices.

WF192app.qx 5/21/98 9:41 PM Page 53

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 65 66

Komentáře k této Příručce

Žádné komentáře

Yamaha WF192 Specifikace Strana 53

Komentáře k této Příručce

Související produkty a manuály pro Software Yamaha WF192