Yamaha SP2060 Uživatelský manuál stáhnout pdf (Strana 38)

Panel Operation

SP2060 Owner’s Manual

Foreword

Network Settings ReferencesPanel Operation

Introduction

to the SP2060

The Controls

and Connectors

Initializing the SP2060

Follow the steps below to initialize the internal memory:

You can select one of the following initialization types:

*Initializing the current scene backup [CURRENT

BACKUP]

*Initializing all user settings (excluding the libraries) to

the factory settings [WITHOUT LIB.]

*Initializing all settings to the factory settings

[FACTORY SETUP]

1. Turn off the power to the SP2060.

2. Turn on the power to the SP2060 while

holding down the [BACK/STORE] key.

The Initialization display appears.

3. Press the [▲INC]/[▼DEC] keys to select a

type of initialization.

4. Press the [NEXT] key to move the cursor to

the icon, then press the [YES] key.

The Initialization operation starts. During initialization,

the following status message appears:

When initialization is completed, the SP2060 displays

the following status message, then automatically restarts.

Mute

When Mute is on, the corresponding Input or Output chan-

nel audio is muted.

You can determine the channel Mute status by checking the

corresponding channel [MUTE] key LED.

• MUTE OFF : Dark

• MUTE ON : Illuminated

1. Press the [MUTE] key to select the Mute

display.

2. Press the [SEL] key for the target channel.

The channel audio is muted and the [MUTE] key LED

lights up. Pressing the channel [SEL] key repeatedly tog-

gles between Mute on and off.

Output port name display

You can view the output port name on the component of

each OUTPUT channel in the display.

1. With [LEVEL], [DELAY], [EQ], [ROUTING], [X-

OVER], or [LIMITER] selected, hold down the

[SEL] key of the channel you want to view for

two seconds or longer.

The upper row shows the output port name on the com-

ponent, and the lower row shows the configuration

name.

When the internal memory is initialized, all data stored in

the memory will be lost. Use caution when you execute

this function.

NOTE

To cancel the initialization operation, select “Exit” and conﬁrm

the cancellation. Alternatively, simply turn off the power to the

SP2060.

CAUTION

INITIALIZE

FACTORY SETUP

INITIALIZE

EXECUTING..

INITIALIZE

COMPLETED!

NOTE

You can mute or unmute even if the User Lock function is turned

NOW SELECT KEYS

ACT "MUTE" ->

1BA

3way-1 MID

[2x3way ]

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

Komentáře k této Příručce

Žádné komentáře

Yamaha SP2060 Uživatelský manuál Strana 38

Komentáře k této Příručce

Související produkty a manuály pro Software Yamaha SP2060