Yamaha RX-V1800 Manuál Strana 102

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 157
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 101
98 En
Saving and recalling the system settings (SYSTEM MEMORY)
Example 1: Comparing the results of the
automatic setup and manual setup
This unit is equipped with three types of parametric
equalizer settings (see page 40), and you can also make
your customized configuration of the sound settings of this
unit by using the “MANUAL SETUP” parameters (see
page 75). To compare the results of the automatic setup or
your manual configuration, use the MSYSTEM
MEMORY buttons.
Saving each setting
Carry out the following procedure when all the parameters are set
to default value.
1 Press and hold
M
SYSTEM MEMORY 1 for
4 seconds.
This unit stores the current settings of this unit to
“MEMORY1”.
2 Perform the automatic setup.
Set “EQ” to “NATURAL”. See page 40 for details.
3 Press and hold
M
SYSTEM MEMORY 2 for
4 seconds.
This unit stores the results of the automatic setup
performed in step 2 to “MEMORY2”.
4 Perform the automatic setup again.
This time, set “EQ” to “FRONT”.
5 Press and hold
M
SYSTEM MEMORY 3 for
4 seconds.
This unit stores the result of the automatic setup
performed in step 4 to “MEMORY3”.
Example 2: Switching the settings for
different room environments
The tonal characteristics of the listening room may vary
depending on the situations of the room (for example,
whether the curtains are open or closed), and the settings
of this unit should be arranged for each situation of the
room. You can switch between the settings of this unit
easily by using MSYSTEM MEMORY buttons.
Saving each setting
1 Close the curtains of the listening room and
then perform the automatic setup.
See page 37 for details of the automatic setup.
2 Press and hold
M
SYSTEM MEMORY 1 for
4 seconds.
This unit stores the settings for the current room
situation (i.e. the curtains are closed) to
“MEMORY1”.
3 Open the curtains of the listening room and
the perform the automatic setup.
4 Press and hold
M
SYSTEM MEMORY 2 for
4 seconds.
This unit stores the current room situation (i.e. the
curtains are open) to “MEMORY2”.
Using examples
Note
4
5
7
6
8
CLASSICAL LIVE/CLUB
ENTERTAIN
MOVIE
SYSTEM MEMORY
3
2
1
SYSTEM MEMORY 1
The current settings of this unit
SYSTEM MEMORY 2
The results of the automatic setup
(EQ: NATURAL)
SYSTEM MEMORY 3
The results of the automatic setup
(EQ: FRONT)
4
5
7
6
8
CLASSICAL LIVE/CLUB
ENTERTAIN
MOVIE
SYSTEM MEMORY
3
2
1
SYSTEM MEMORY 1
The settings when the curtains of the
listening room are closed
SYSTEM MEMORY 2
The settings when the curtains of
the listening room are open
Zobrazit stránku 101
1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 156 157

Komentáře k této Příručce

Žádné komentáře